Reciprosity

DESCRIPTION DATA SHEET ACCESSORIES Test specimens are mounted on a sliding platform that moves in a horizontal reciprocating motion ...

The kit includes all accessories specified in test method GMW 14125: 5 mm and 10 mm scraper; brass brush holder; Spherical ball rubbing fi...

Designed to GMW 14125, this device incorporates a dial to raise and lower a support test stand, allowing tension to be added to textile samples.

Accessory weight for alternative scorcher, includes 500 g; 1000g; two weights of 2000g and 5000g each. Use to achieve test loads specified in ASTM...

Accessory weight for alternative scorcher, includes 100g; two of 200 g each; 500g and 1000g weights.

DESCRIPTION DATA SHEET Additional test arm kit. Accessory for Alternative Burner 5900. Maximize test time with additional test arm m...

"For use with the Taber Reciprocating Abraser to enable testing of magnetic data cards in accordance with ISO/IEC 10373. Accommodates 53.98 mm x ...

Used with reciprocating scorcher, the ISO 1518 ramp kit allows the scorching tool to start in an elevated position (off the sample surface...

Mar Tool 15.0mm diameter, tungsten carbide hemisphere. For use with Taber Linear Burner, Reciprocating Burner or Multi-Finger Scratch/Mark Tester....

A rubber abrasive material (not included) is placed over the 30.6 mm diameter test ball and secured in place with a threaded holder per GM...

Optional weight for reciprocating scorcher to achieve a load of 5000g on the test sample.

Accessory weight for reciprocating scorcher to achieve a load of 46 N on the test specimen.

Optional weight for reciprocating scorcher to achieve a load of 2400g on the test sample.

Optional weight for reciprocating scorcher to achieve a load of 2000g on the test sample.

DESCRIPTION DATA SHEET ACCESSORIES TO Brass brush holder accessory, includes brass brush with three cutting rows . Download...

Replacement weight for reciprocating scorcher to achieve a load of 24 N on the test sample.

Optional weight for reciprocating scorcher to achieve a 1000g load on the test sample.

Replacement weight for reciprocating scorcher to achieve a 10 N load on the test specimen.

Optional weight for reciprocating scorcher to achieve a 500g load on the test sample.

Optional weight for reciprocating scorcher to achieve a 100g load on the test sample.

Optional weight for reciprocating scorcher to achieve a 150g load on the test sample.

Optional weight for reciprocating scorcher to achieve a 200g load on the test sample.

Optional weight for reciprocating scorcher to achieve a 50g load on the test sample.

Replacement weight for reciprocating scorcher to achieve 5N load on the test sample.

Replacement weight for reciprocating scorcher to achieve a load of 2.5 N on the test sample.

Replacement weight for reciprocating scorcher to achieve 2N load on the test sample.

Replacement weight for reciprocating scorcher to achieve 1N load on test sample.

The replacement aluminum abrasive needle meets the requirements of ISO/IEC 10373 for testing magnetic data cards. For use with magnetic stripe abr...