Wet Film Thickness Gauge
- DESCRIPTION
- DATA SHEET
- ACCESSORIES
-
Characteristics:
- The paint thickness gauge is made of aluminum and can be kept as a record of wet paint thickness taken or cleaned with solvents and reused.
- The wide measurement range and high resolution of film thickness measurement ensure that the meter accommodates all wet film measurements required by the user.
- Custom color combination available
- Your wet paint thickness gauge would be screen printed or digitally printed on polished aluminum foil
- Meets ANSI/NCSL Z540-1 as applicable when ordered with certification.Technical data: caliber ranges Scale of 1-80 thousand: 1, 2, 3, 4, 5, 6, 7, 8, 9,10,11,12,14,16, 18, 20, 22, 24, 26, 28, 30, 35, 40, 45, 50, 55, 60, 65, 70, 80 25-2032 micron scale: 25, 51, 76,102,127,152,178, 203, 229, 254, 279, 305, 356, 406, 457, 508, 559, 610, 660, 711,762, 889, 1016, 1143, 1270, 97, 1524, 1651, 1778, 2032 25-2000 micron scale: 25, 50, 75,100,125,150,175, 200, 225, 250, 275, 300, 350, 400, 450, 500, 550, 600, 650, 700,750, 900, 1000, 1150, 1250, 00, 1500, 1650, 1800, 2000 Instructions:
1- Place the meter on the wet film at a 90° angle
2- Press on the movie.
3- Remove and look at the deepest tooth that has paint and the next top tooth that is not coated.
4- The thickness of the wet film is between these two readings.
5- Clean the pressure gauge with any suitable solvent immediately after use.
6- The drawing indicates that the tooth marked with 3 thousandths of an inch has made contact with the wet paint and the tooth marked with 4 thousandths of an inch has not. This indicates that the true wet film thickness of the material is between 3 and 4 mils.