New thickness gauge - Byko Test

The Byko-Test offers a unique solution for monitoring environmental conditions while measuring dry film thickness.
Air temperature and humidity sensors are integrated into the meter.
The dew point temperature is displayed to determine if conditions are suitable for painting.

The Byko-Test complies with SSPC PA-2 and ASTM D 7091 methods for coating thickness measurement. There is an SSPC mode to assist the operator in measurement and calibration protocols.
The large rotating color screen is readable in high and low light conditions.
The Byko-Test It is easy to use with large operating buttons ideal for gloved users.

Byko - Test

■ Four measurements in one instrument : Fe/NFe film thickness, Dew point, air temperature, relative humidity
■ SSPC-specific mode for standardized measurement protocols and calibration routines
■ Compact design
■ Color screen, 90° and 180° rotatable
■ Automatic substrate recognition
■ Wear-resistant ruby ​​probe tip .
■ Zero, simple and two-point calibrations
■ Key lock to take readings only
■ High/low tolerance setting for pass/fail warning
■ Statistical mode with 1000 measurement memories; Continuous measurement mode
■ Stability mode warns the user when the instrument is tilted to prevent incorrect readings

__________________________________________________________________________

Byko - Test Lite

■ Compact design
■ 90° and 180° rotating color screen
■ Automatic substrate recognition
■ Ruby probe tip
■ Stability mode
■ Key lock
■ High/Low Tolerance Settings
■ Zero point calibration
■ Statistical mode with 1000 measurement memories
■ Continuous measurement mode